Playing card box

This is my take on a TPU/PETG mixed material case for playing cards.

I really liked the idea behind https://www.prusaprinters.org/prints/66718-tpupla-hybrid-box-card-case , just didn't like to put a rubber band around it that gets lost, so my box has a small notch to keep it closed. So this is not actually a remix, but was inspired by the mentioned design.

The box was originally made for my sons “UNO junior” playing cards, so it fits cards with a size of 57mmx87mm and a radius of 4mm, with a total stack height of around 18mm.

The box was designed completely parametric, so in case you want to create your own for differently sized cards, simply open the attached Fusion360 file and change the parameters accordingly.

I used generic TPU profile with TPU95A, raised max volumetric speed to 4 and added a color change (to use PETG afterwards) for layer 3.