Slim Raspberry Pi Zero 2 W Case - mount for Mini frame

You'll need :

1 x M3x12 screw
1 x M3 T-nut
4 x M2.5x4 screws

The back has a guide to prevent the case from rotating, as it's attached with only one top screw. It also helps to set it up at the lowest position on the frame.

I modified the top case to match the M2.5x4 screws I had. I also added a blind hole to increase the led brightness.

Step files added to allow other remixes.

Thanks to Marius for his nice work !!!