Self-closing child-safe electric outlet cover

This is a spring loaded self-closing version of my previous design. In about 45 minutes you can create this life saving outlet cover, designed for young children to prevent electrocution. After printing, assemble the two parts by just snapping the sliding plate into the frame. The design has a spring mechanism that closes on its own when you pullout the power plug, just slide up to open the outlet using your power plug then just pull the power plug and it will automatically close. To install, you can apply a 1mm thick double sided tape on the bottom of the base or you can simple put CA glue directly on the electrical outlet for a more secure attachment. Do not forget to put supports and a brim when slicing.