Yarn spinner/holder with weight

This is a yarn spinner/holder with a space that you can either use to store stuff, or to fill with something that gives it weight! I use a bag with beans, so it stays steady in place.

Printing: The parts don't require support when printing, but I recommend to print the Pin part horizontally (and with support, if so), as after some tests I found it easy to break when printing vertically, because of the layers position.

Onshape CAD project: https://cad.onshape.com/documents/57e67a38462f577e096708a7/w/1e7b33ac842eee786a51f7f5/e/7c8a0b0bd1f1e22a721c3e0c