Raspberry Pi 5 quality case, with VESA mount (V3.6)

Just another case for Raspberry PI 5 with or without active cooler.

Because the fan cooling there are not too many ventilation holes in the case.

Slightly everything holds together without any screws. 

That is nice if you must open and close it many times.

But definitely I recommend the two screws in the front (2 x 2.5mm/8mm, countersunk ).

The other four screws are also 2.5mm.

SD card can be handled easily from the back. 

Change on v3.5 : Connectors (specially HDMI) go closer to the board (about 0.7mm).