Drill bit support for Bott Perfo pegboard

This model is a drill bit holder to fit to a Bott Perfo peg board.

I designed it to hold two sets of drill bits:

• Bosch X50Ti (*very* cheap, but by far the most often used around the house, excellent value for money)
• Bosch Professional 19pc HSS-Cobalt Pro Box Metal Drill Bit Set 1-10mm

See my other Bott Perfo pegboard models:

• Driver and drill bit holder 1/4 hex for Bott Perfo pegboard
• Screwdriver holder for Bott Perfo pegboard (with variations)

Tolerances to fit the drill bits are tight, so that the bits fit snugly and don't move about. Depending on your printer/filament/settings, you might need to use each of the drill bits to very slightly enlarge the respective holes. I didn't need to on the models published, printed on PLA on a prusa mk4. Also the thinner drill bits are quite close together, so not particularly comfortable if used very often. Infrequent use is absolutely fine.

I haven't embossed the drill bit sizes, as I thought just making a sticker would be so much faster.

Printing notes: Works well using PLA - I used 4 perimeters to ensure strength of the model, but the drill bits are not very heavy anyway, so loads are minimal. Infill of 15% works fine too.