Wall_Key_Hook

Hi everyone,

This Key-Hook can be mounted on wall I have prepared 2 different types of design.

The mount is very simple, have 2 holes with diameter 3.5mm.

Printing parameters:

• Optimal printing parameters.
• Infill 100%
• Supports not necessary.
• Layer high 0.3mm
• Print time: 

                                  - first version 47 min.

                                  - second version 55 min. 

       - Both versions printed with 0.3mm layer and 2 colors.

    Recomanded materials: 

• PLA
• PETG

1. First version with 5 hooks see picture bellow:

     2. Second version with 3 hooks for different categories of key see picture bellow:

Happy printing :)