Vespa rack hold down clip / Vespa rack bushing

.3mf and .f3d files for a Vespa rack hold down clip and Vespa rack bushing. I printed them in PETG, 20% gyroid infill
8
73
0
255
updated May 19, 2024

Description

PDF

I created a Vespa rack hold down clip and Vespa rack bushing. The purpose of the clip is to hold a rear or front rack in the down position but it can also lock it in the up position, and so the clip can be stored effectively on the rack itself. The purpose of the bushing is to prevent the rack bars from vibrating on eachother, and generally they come with the rack. The ones I created represent replacements or additional bushings, if so desired. They fit well and can be taken off fairly easy. I printed them in PETG, but they would probably work just as well in PLA, although with time and exposure to the elements they will decay. For flexibility and durability I chose to print them at 20% infill, gyroid pattern.

Tags



Model origin

The author marked this model as their own original creation.

License