Tentacool & Beacon for VzBoT & Goliath Short

Desing taken from Mirage's Hevort project - https://hevort.com/

19.5.2024 - Created variant Rev. D (E)
23.5.2024 - Added variant for Rev. H

BOM:
- 4pcs  M3x5x4 brass heat inserts
- 2pcs  M3x12 screw
- 2pcs  M3x10 screw

Beacon Rev. D (E) offset:  X=0  |  Y=33

Beacon Rev. H offset:  X=0  |  Y=36

I printed it with 3DO ASA-CF. Anything with heat resistance will be good choice.

Used 0.5mm layer width, layer height 0.2mm.

Adapted for VzBoT CNC printhead with Goliath Short hotend.