A bullet planter with smooth surface.
4 stl files are included.
Top half
Bottom half (cone region)
Top half and bottom half as a single object
Stand
The planter was devided into two parts because I wanted to change print settings.
video is on Youtube
https://youtube.com/shorts/CsfC--LbTmI
Similar bullet planters with different designs are on culd-3D.
https://cults3d.com/en/design-collections/yam036/bullet-planters
3D PRINTING SETTINGS
Orca slicer and Creality K1 were used to print using PLA filament.
Top half and cone region were imported as a single object and placed upside down.
settings of top half
2 walls, 10% gyroid infill, 80 mm/s for outer wall, 120 mm/s for inner wall
settings of cone region (because of overhangs, setting was changed as followes)
3 walls, 15% gyroid infill, 50 mm/s for outer wall, 70 mm/s for inner wall
print setting of stand
3 walls, 30% gyroid infill, 10 mm outer brim
The author marked this model as their own original creation.