Faucet Aerator Removal Tool Wrench - 2 in 1, Standard 24 mm and 20 mm Option

Easy-to-print tool / wrench/ key for two sizes of aerator taps
11m
1× print file
0.30 mm
0.40 mm
5.00 g
15
60
3
286
updated May 19, 2024

Description

PDF

Model Info | Introduction

I want to introduce you to an easy-to-print tool / wrench/ key for two sizes of aerator taps  :)

Use 5 perimeters for a really strong tool - I had no problem with PLA and tight fit.

If you chose the wrong size: no problem! Just print the 20 mm inlay (colored brown) afterwards, and you are good to go when you have a smaller aerator. Standard is 24 mm in Germany.

Interested in the technical details? Here you go. Standard is 24 mm with narrowing to 22 mm.

Print Settings

· 5 perimeters are recommended. For easy fit, the standard 2 perimeters work, too.

· It was designed for easy printing and should work just right away :)

ADUDINO 3D Models. Get exclusive and practical designs. Please respect the copyright.

Tags



Model origin

The author marked this model as their own original creation.

License