Kärcher Makita battery adapter

V2

V2 is optimized to print without supports and has all cut-outs for other devices

V1

I created the model in such a way that the support structures are included and only need to be broken out after printing. The perforated tip also has to be broken off after printing. I prtinted in PETG.

I have also uploaded the files without supports, in case someone wants to print the files differently.

The following parts are required for assembly:
Makita terminal 644808-8 or 644808-8
3x M3x15 mm screws
2x M3 nuts
4x 6.3 mm flat receptacles
Cable - I have used old loudspeaker cable here

I put the two models together and adapted them to create the Makita to Kärcher adapter.