90 Degree Angle Clamp, Woodworking Angle Clamp, Right Angle Clamp Tool With Adjustment

My 90 degree Angle Clamp was broken, I redesigned the part and used 3dprinting for repairing.
2
10
0
173
updated May 19, 2024

Description

PDF

Here in the Netherlands you can buy cheap 90 degree angle clamps which are adjustable, in the Action shop.

Unfortunately they contain a part that is easy to brake. That happens to me almost instantly, so I decided to use 3dprinting for rescuing the clamp.

The part that was broken, is a small piece that's a part of the locking mechanisme. You can take apart the complete clamp, because it's press fit held together and easy to take apart. Remove one small steel rod, to get access to the broken part from the mechanisme.

I designed the part in fusion360, and sliced it with prusaSlicer and printed this in PLA, with a 0.25mm nozzle, and a minimum of 8 perimeters and 50% infill for the maximum strength of the part. 

Use support and make sure the placement of the part so that you have maximum strength.

Tags



Model origin

The author marked this model as their own original creation.

License