Nest Cam (Battery) Alleyway Mount

Nest Cam (Battery) mount for narrow spaces, such as alleyways.
Your funds support the creator's further activity.
$6
0
0
78
updated May 19, 2024

Description

Nest Cam (Battery) mount for narrow spaces, such as alleyways, where the default mount does not allow enough of a view along the mounting surface. Allows camera direction to be parallel to the mounting surface with a 45-degree mounting angle.

The mounting plate that the magnetic mount twists onto is built into this mount so you still only need to screw into one surface. The screw holes to the mounting surface are designed for the screws that come with the camera.

Print with the camera mount plate on the build plate with supports enabled - the rough bridged surface will be hidden by the magnetic mount. I suggest printing with at least 3 perimeters and at least 20% 3D infill (gyroid or cubic) for sufficient strength.

ASA is recommended for UV (sun) and heat resistance. Ideally print ASA in an enclosure to prevent warping and increase layer adhesion.

Tags



Model origin

The author marked this model as their own original creation.

License