Prusa Bear IKEA SKYDRAG LED Light Bar

Prusa Bear IKEA SKYDRAG LED Light Bar Holder
 

Lamp used:
SKYDRAG Size 40cm
https://www.ikea.com/de/de/p/skydrag-led-lichtleiste-arbpl-klschr-sensor-dimmbar-anthrazit-90439628/

904.396.28

The Skydrag lightbar is operated with 24V 3.6W and can be directly connected  to the power supply (only MK3) with an inline fuse of 150mA 

White=+24V
Black=Ground

The lightcable is attached to the holder with 2mm cable ties

Optionally, the right side is available as a Reverse Bowden version.

Print Settings:
Material: PETG
Layer Height: 0.20mm
Infill: 20% Gyroid (in retrospect is 20% maybe more than needed)
Supports: Build plate only (.3mf files where the support is specified are available)