Sovol SV08 TPU Antivibration Feet "Bambu Style"

SV08 Antivibration Feet "Bambu Style"

Hardware:

Reuse original bolts to fasten feet.

Printing instructions: 

Print Antivibration Feet in TPU.  No Supports Needed.  10 to 15% infill.  3 walls for vertical and horizontal top and bottom.

The infill and number of walls may vary between different brands of TPU. 

I used Sunlu TPU 95% Shore Hardness with 10% infill. For instance, the same setting wouldn't work on Naga TPU it was too soft compared to the Sunlu same 95% Shore Hardness But had to print with 15% infill to achieve the same result.

So, my recommendation is to print one to get the desired softness you are looking for. I recommend a medium hardness with a little squish. If you want harder or softer adjust as needed. 
  
 

Benefits

• Reduce Vibration and Better results with Input Shaping.
• When you place a single printer on the desktop, the anti-vibration feet can effectively reduce the desktop shaking caused by printing.
• When multiple printers are placed on the same unstable desktop they can effectively reduce the impact of machine vibration on nearby machines.
• Raised printer for better ventilation

X

Y