Whirlpool shelf mount

I prepared a model based on the original part. The print is done in ABS+ and printed on an Ender 3 v2 normal configuration without an enclosed case. Printing with a 0.4 nozzle in a high quality setting (0.12) took 7h (table temperature 100 nozzle 250). Finally, I painted the whole thing with the same ABS filament dissolved in acetone (I hope this will increase the durability of the print) I cooked the first samples in the dishwasher with 60 degree drying. They passed the test without distortion.  

To make things clear, the room with the printer is small and sunny - the print is printed without distortion only when the room door was closed.