Due to the weight of the cable on the neptune 4, the old head has been... bent, fear not, here I am, stronger than ever!
🤩 Do you like the design? You can help fund innovations like this!
Consider supporting me!
Much appreciation given to my supporters, and you get exclusive access to various CAD files!
Submit feature requests here!
Features:
- Reinforced design
- Rotates the cable as gently as possible without affecting homing
- Designed to print with minimal supports
NOTE: Auxiliary fan cannot be installed alongside this bracket! It was originally made the neptune max, which has a lower side bracket than normal due to the tie rods, therefore this print head bracket is also made lower to match!
Installation requires:
- 2x M3 heatset nuts (4mm long maximum)
- 2x M3 x 6mm taper end screws
Recommended print settings:
- Print direction: as imported
- Nozzle diameter: 0.4mm - 0.6mm
- Infill: Gyroid/3Dhoneycomb 30%
- Walls: 4
- Top and bottom layers: 5
- Layer height: 0.2mm
- Print orientation: as imported
- Supports: as shown in picture
Recommended materials:
- PETG
- PC
- ABS/ASA
- Basically any materials that avoid creep
The author marked this model as their own original creation.