Harry Potter Magic Wand Elderwand Dumbledore

Model of the Elder Wand from the Harry Potter series. This is a 2-part wand which goes together without magnets or glue. The joint isn't noticeable.

The assembled wand is 15" / 38cm long.

.02mm layers

2 walls

15% Infill

The print profile has it angled as it should be printed both to fit the bed as well as support. I used tree supports. You may want to slow this down. I set most of the speeds to a max of 50mm/s. The initial layer and support are faster as they are printed before it gets too tall.