Small Eppi/sample container Box (1,5 & 2 mL)

I designed a Nozzelbox and I thought I will also be a good sample box!

Therefore I redesigned it a bit so 1,5 & 2 mL sample containe can be storred savely!

There is only a small amount of room for the containers to move.

It has enough room for a total of 16 samples.

You just need to add some filament (1,75mm) for the hinge.

Printparameter: 

Layer height: 0.2 mm
Line width: 0.4 mm 
Walls: 3
Infill: Cubic 10%
Support: yes
Printtime: Around 3:17 hours

Used Filament: Elegoo PLA+
Used Slicer: Orca 2.0.0
Used Printer: Elegoo Neptune 4 Pro

I hope you like it as much as I do!
In case you have suggestions for improvements, please contact me!