Toy Fire Strobe

Basic representation of a ceiling-mounted fire strobe. I printed this as a toy for my son who is really into fire alarms and fire safety equipment, but I sized it accurately enough that it could even be used to mock up where a strobe could be mounted. It's not necessarily based off of any particular model, but it's 173mm wide, which seems to be a somewhat standard size.

This version doesn't have any mounting holes-- I recommend using some form of double-stick tape or 3M Command strips to mount it. I may make a revision of this with mounting holes for nails or screws.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

5%

Filament:
IID MAX PLA+ Red/White

Notes:

Sliced with PrusaSlicer, printed on a heavily modded Ender 3 with ABL and a Titan Aero hotend with a 0.4mm nozzle. Printed with 4 bottom layers and 5 top layers.

Model is designed so that you can cleanly swap to a different color filament for the "FIRE" lettering and the dome.

Category: Toys & Games