Lamp Base #6 - Art Deco Cityscape

An abstract Art Deco style cityscape lamp base using an e14 socket. Can support a lamp shade that has a 30 mm opening or a holder for an open shade.

Lamp base is 250 mm tall by 140 wide ..

No supports required.

The fassung-lamp socket ( e14-28 mm):
     https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
     https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used will depend on the opacity and style of the shade.

The E14 Bulb used here:
     https://www.amazon.de/dp/B0B5MPL9MX

This lamp base was printed on an AMS unit using 2 PLA filaments

The slicer settings for the stand :

.20 mm Standard and 

(All standard settings and speeds, Aligned seam settings

Filament:  eSun PLA+ Black

                   Eryone Silk Silver

The shade and upper and lower cover plates used in the picture were printed using the following settings and materials:

The slicer settings for the upper and lower covers :

.20 mm Standard and 

(All standard settings and speeds, Aligned seam settings)

Filament:       eSun PLA+ Black

The slicer settings for the shade :

Filament:    Sunlu PLA+ White

.16mm Hight Quality

100 % Infill, Rectangular

Shade was printed with the wider frame ledge on the plate for stability during print.