Mausberry Circuits intelligent rocker switch holder

This is a small holder for the mausberry-circuits RockerSwitch RaspberryPi intelligent power switch see: http://mausberry-circuits.myshopify.com/collections/frontpage/products/shutdown-switch-with-rocker for use in the Adafruit Pimoroni Picade Cabinet Kit, https://www.adafruit.com/product/2706 the switch fits snugly into the 3d printer holder which in turn is poitioned on the back panel door against the back middle vent at the top.. I used a couple spare bolts in the Picade kit and drilled two small holes in the back door panel to slip the bolts thru..

Print with supports the overhanging tabs will need them.

Print Settings

Printer:

Craftbot

Rafts:

Doesn't Matter

Yes

Resolution:

0.3

20

Notes:

Quality/Raft/Infill doesnt matter too much but it will need supports for the overhanging tabs.

How I Designed This

Created in tinkercad.