GRAVITRAX Stone with triple crossing and height stone with pass throughs

GRAVITRAX; Ever wondered why they only do double crosses? You can do triple now too. Is that Column in the way too? Let’s pass through it then. Just print your own!

GRAVITRAX Stone with triple crossing and height stone with pass throughs on top h=25 mm (v.20211118.r00). It has a tunnel through which ball can pass.

Print includes two parts: Column and Footplate; Footplate clicks in the bottom of the stone.

You do need some force to click it in, that is intended that way (use other height stone to tap footplate in place). Tested, fitted and used with my own Gravitrax sets

More to come, if you like it and you are rich enough then Paypal Me, else just enjoy!

G-code details:

• Printer: Prusa MK3/S/S+
• Material: PLA (1.75mm); 22 gr.; 8.29 m
• Print settings:
  • Nozzle 0.4 mm
  • Extruder 210 C°
  • Heated bed 60 C°
  • Layer 0.15 mm
  • Infill: Grid 20%
  • Adhesion: Skirt
• Print time (est.): 2 hr. 58 min.
• Software: Cura v.4.12.0
• Stl file: exported from dwg