This is a deck box designed for Standard MTG. Can be used for other TCG as well. It has an insert for dividing 60 double sleeved with a sideboard, dice, counters, ect. With the insert removed there is space for 100+ double sleeved cards.
The lid is left without any symbols on it for this version.
Supports should not be required, however I use them for any symbols I put on the lid to reduce sagging on the bridging.
.2mm layer height for box
.16mm layer height for lid required for certain details.
Pauses for Box: layer 205 with .2mm layer height
Pauses for Lid: Layer 29 with .16mm layer height
The deck box requires eight 10x3 round magnets for securing the lid that are imbedded in the print requiring a pause to insert them. The 3mf is already setup with pauses for the magnet insertions and color changes for anyone who wants dual color lids.
A remixable lid is available as well to add your own symbol: https://www.printables.com/model/881474-remixable-lid-for-gg3d-standard-deck-box
The author marked this model as their own original creation.