3D Models 3D PrintersOther Printer Parts & Upgrades

Spoolholder/Filamenthalter

6 reviews
It is a adjustable spoolholder. You needed four bearings 608. Print instructionsPrint the screws with 100% infill.
33
616
7
2531
updated November 3, 2019

Makes

Comments

Stanshady1984 7
Stanshady1984
@Stanshady198_1418508
Reply February 9 at 3:07 PM
Prusa XL
Peter 10
Peter
@Peter_68245
Reply December 22, 2024 at 9:28 AM
Prusa MK3/S/S+
MaxPa 14
MaxPa
@MaxPa_277440

Nice design! I printed in in PETG

Reply February 12, 2024 at 8:17 PM
Prusa MK3/S/S+
Florian Reppin 16
Florian Reppin
@FlowlineDesign

It works good, thank you.

Reply September 28, 2023 at 10:19 PM
Creality Ender 3 S1 Pro
T 14
TrickyCode
@TrickyCode

Couldn't print it at 0.2mm so I printed it in 0.1mm for the wheels and 0.2mm for base. Works as expected

Reply June 30, 2022 at 8:38 PM
Prusa MK3/S/S+
MaxPa 14
MaxPa
@MaxPa_277440

Works nicely, though sliding the parts onto the rail is a little tight.

Reply 1 like June 15, 2022 at 10:38 AM
matelo 15
matelo
@matelo

Good design!

Reply 1 like January 19, 2022 at 7:27 PM
Dz 12
Dz
@Dz_47333

Funktioniert Top

Reply February 25, 2021 at 5:10 PM
leon17531 1
leon17531
@leon17531_72958

very good design, it just works.

Reply July 22, 2020 at 8:11 AM
J 5
Joko_B
@Joko_B_34470

I`m glad you like it.

Reply July 25, 2020 at 8:43 PM
All comments loaded