Livboj Gridfinity Phone Charging Station

Gridfinity and Livboj in landcape mode. 2x4 base and two models. One with a 45° angle for my desk and one 70° angle for my nightstand. 

Layer height at 0,28 mm with 15% infill and good bed adhesion for the gridfinity base. I had a filament change between 17-20 mm for the colored line and a flower of life coaster, scaled to 20%, attached with some double sided tape. Polyterra PLA Carbon Black and PrimaSelect PLA Glossy Antique Copper was used. 

USB-C cable can be attached from left or right, I used tweezers to push the cable into the charger.

Modeled after Samsung Galaxy S22 Plus with a case, 166x84x14mm. Hmu if you want other dimensions :)