Dust and sawdust exhaust - quick coupler

Consists of D50 flange and D50 bushings.

There is a 52 x 3.5 o-ring in the flange, it may need to be sanded down slightly for easy insertion of the flange into the housing.

The case is glued together from two parts. Other parts are assembled without gluing and hold reliably.

A D50 pipe and a reduction for a D32/40 vacuum cleaner hose are inserted into the cases.

It follows the terminal at the address:  https://www.printables.com/cs/model/868768-dust-and-sawdust-exhaust-terminal  , where the same flange is.

PLA

Nozzle - 0.4 

Layer - 0.2 SPEED 

Fill 15% 

Supports in the groove 

Brim (Pouzdro 2)