DRAWER add-on for Stealth Press ZERO
Description
ABOUT DRAWER ADD-ON (for Stealth Press ZERO)
This is drawer add-on for Stealth Press ZERO.
Not less. Not more. Small, nice, clicks on magnets and allows to store bunch of stuff. Has integrated tray.
Wider base adds to even more stability of the platform.
ASSEMBLY INSTRUCTIONS |
WHERE TO SOURCE MECHANICAL PARTS OF THE BUILD?
Self-source using BOM (bill of materials table) |
Printed Parts | |
|---|---|
| Printed parts (free for download in files) | 4 |
Other | |
|---|---|
| Superglue (cyanoacrylate adhesive) — i.e. Loctite or similar | 1 |
PRINT GUIDELINES |
Here are print guidelines for you to follow in order to have decent success with printing parts:
| 3D PRINTING PROCESS | FDM (fused deposition modeling) |
| INFILL TYPE | Grid, Gyroid, Honeycomb, Triangle or Cubic |
| MATERIAL | ASA, ASA-CF, ABS, ABS+, ABS-CF |
| INFILL PERCENTAGE | 40% - 60% |
| LAYER HEIGHT | Recommended: 0.2mm |
| WALL COUNT | Recommended: 4 |
| SOLID TOP/BOTTOM LAYERS | Recommended: 5 |
| EXTRUSION WIDTH | Forced 0.4mm |
Side notes to the print guidelines:
You can succeed with Support cubic infill type (slicer support may vary) and as little as 21% infill for all parts if are aiming for faster print speeds and less filament usage.
PLA, PLA+, and PETG are also considerable filament choices. However, take into account that soldering iron radiates some indirect heat. The usage of less temperature-stable filaments may result in part deformations over time.
A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 are just fine for this particular build.
File naming for printed parts:
The parts use this naming convention:
- PRIMARY COLOR — These files will have nothing at the start of the filename.
- ACCENT COLOR — Files have “[a]” to the front of any STL file that is intended to be printed with accent color.
- REVISION NUMBER — i.e. r1.0 stands for first revision of particular file. I update files fairly regularly taking into account community feedback. Always check/download the very latest versions to ensure the best build experience.
- COUNT OF PARTS — Files have “x1” to “x3” at the end of any STL file. The number represents the count of identical parts to be printed.
THANK YOU! |
Thank you for supporting (or considering to support) my work as a Printables Club member or purchasing this model in Printables Store.
Your support is invaluable and allows to push my projects forward striving to build the best almost fully 3D printed tools for the creators community.
Check out my other projects too:
CHANGELOG |
| Date | Revision and changes |
| 15.05.2024 | Initial version (R1.0) |
Model origin
The author marked this model as their own original creation.
