Leonardo - Ninja Turtle - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 180x180mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA Basico Control3D Black Transmission Distance: 1.6
PLA Overture Chocolate Transmission Distance: 0.2
PLA Basico Control3D Blue Transmission Distance: 3.2
PLA Basico Control3D Green Transmission Distance: 4
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA Basico Control3D White Transmission Distance: 1.2
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Chocolate
At layer #13 (1.12mm) swap to Blue
At layer #16 (1.36mm) swap to Green
At layer #20 (1.68mm) swap to Sunrise Orange
At layer #24 (2mm) swap to White for the rest.