Scout's 'SmolStop' Hand Stop

Scout339's 'SmolStop' Hand Stop, inspired from Driven Arms ShortStop.

Requires 1x T-Nut for MLOK.

For duty-grade strength, I recommend 6 walls and 50% infill. I've tested it with ASA, but PLA+ and PETG should also work, and any Filled Nylon (and possibly filled PETG? I haven't tested that enough though) will be even stronger.

you can orient the print any way that makes sense, but i've printed with MLOK slots facing the build plate (upside-down) or at a slight angle.

Fuzzy Skin Settings used in second picture are as follows:
0.1mm layer height
0.2mm thickness
6mm density