Store your petri dishes in these towers for easy access and easy refilling. The different sizes have the same mounting system so they all fit on the stand. They can also be wall-mounted using the slots in the back or just placed on the table with the flat bottom they have. The shape of the slots allows for a range of screw sizes to be mounted on. The largest a screw head can be for this is 16mm in diameter.
The print-in-place bearing in the stand allows for a secure connection between the bottom part and the rotating part with smooth rotation still possible. The Two stand parts do need a little glue to make sure they do not come apart.
All the petri dish towers need little amounts of support for the mouth opening.
The two mounting holes in the back are 100m apart.
The available sizes are for Petri dishes with the sizes:
- 35mm x 10mm
- 60mm x 15mm
- 65mm x 15mm
- 94mm x 16mm
If other sizes are needed, let me now with a comment and I'll try to add it as soon as possible!
The author marked this model as their own original creation.