I needed to hang my EGO 765 blower facing down. All the mounts I found were for smaller models or had the blower tube facing UP. So I designed this. As far as I know this will only work on the 765 blower because of the stand design EGO used on this model. I have included a tube stand-off, too, if you want to use that so it hangs straight down.
I printed this on an Elegoo Neptune 4 Max with a 0.6mm nozzle in about 2hr 48min. using Orca Slicer (they have a profile for the Max with a 0.6mm nozzle that works great). I did not need a brim or any other support. It's a clean print with zero post work.
The author marked this model as their own original creation.