Inventions - Evolution of Ideas: Milestone Display Stand

Invention milestones that have spread across the entire world should be celebrated, not merely discarded! This is a display stand for discarded Milestone tiles for the board game Inventions - Evolution of Ideas. The stand holds thirteen Milestone tiles, as the remaining eight will still be on the board when the game ends. The stand is separated into three pieces to make storage easier.

The attachment pegs on the two side stands are designed to be slightly smaller than the holes on the middle stand, but may need to be trimmed a little with a knife depending on how much overextrusion takes place during the print.

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Rafts:

No

Supports:

Yes

Resolution:

0.8 mm Nozzle; 0.2 mm Layer Height

Infill:

20%

Filament: Paramount3D; Amolen PLA Karnak Sandstone; Marble

Notes:

Support was used in the middle segment for the slots where the attachment pegs go from the two side pieces. One filament swap was done with each piece.

The tray was designed in Fusion 360 and exported as an .STL file through MeshMixer. The "Inventions" logo on the underside of the middle piece came from a screenshot of the downloadable "Upgrade Cover Sheet V6" PDF. The image was edited and converted into black and white with GIMP, transformed to an .SVG file using Inkscape, and imported into Fusion 360 for extrusion.