Archetype Nozzle cleaner For Voron Trident

This is a nozzle cleaner for Voron Trident + Archetype (Small) users.
I tested it on Blackbird and Breakneck for about a month and found no problems so I am uploading it.

The mount design was referenced from purgebucket and the bucket design was referenced from Voron2.4 bedpan.
Thank you for releasing the CAD file.

It is similar to the previously uploaded nozzle cleaner for stealth burner.
Modified to increase rigidity to prevent shaking.
Buckets are held in place with magnets

The video was filmed with Blackbird, but I previously confirmed that breakneck also works.

No need for z-homing
Print start, printing, print end can be cleaned at any time.🫡

Maybe it can be used in multicolor as well?
Unless it's a cutting method...🤔

BOM

1x Nozzle Brush

2x 6x3 size Magnet (Holder)

2x Steel FHSC Bolt (FHSC Bucket) (Not SUS!!!)

2x 6x3 size Magnet (Magnet Bucket)

Please select one of the two buckets
I recommend FHSC because the magnet bucket is too strong.

The explanation may be strange due to the use of a translator.🥲

Mounted on the XY gantry, nozzle cleaning can be performed regardless of Z homing.