Corner and Edge Limit Test for the Sovol SV06 Plus

298mm x 298mm x 1mm. Sliced in Ultimaker Cura; these are the max dimensions that it allowed, although other slicers may be different. You may have to center the model before slicing. The SV06+ comes with a Klipper that has auto leveling, but this model may also help with leveling if you have to level manually. If your printer's build plate has the same dimensions as the SV06+'s build plate, you could also use this model for your tests. Lastly, this can show you if you have any adhesion issues to take note of along the edges of your build plate.

Relevant Slicer Settings Used:

10% Infill Density

100 mm/s Print Speed

Z-Hop = ON

Filament Used:

Polymaker PolyTerra Cotton White PLA - 200°C