Driver for my Jeep. Cover for the trailer.

My Jeep needed a driver. Driver was converted sitting from standing. Trailer needed a cover.

After download and modification of the Jeep I downloaded and modified the trailer.

Star for better printing: https://www.printables.com/de/model/864252-revised-star-for-better-printing

Jeep: https://www.printables.com/de/model/791346-jeep-kit-card 

Trailer: https://www.printables.com/de/model/843852-trailer-for-the-jeep-kit-card/comments/1755654 

The remodelled soldier is in the files section. The cover for the trailer also. The cover I found in wild-west sceneries and closed front, cut to fit the trailer.

Some after printing tips:

1. Arms need a 1.5mm drill for receiving the hands. 
2. Hands need to be filed to fit the arms, glue it together.
3. Drill Ø1-1.2mm through head to receive the pin of the neck, glue it together.
4. Helmet to be glued to the head.
5. Helmet with head glued on the body (neck-pin).

Printed the soldier on my BL A1 with Prusament Army Green PLA and 0.2mm nozzle. Came out fine for a FDM print.

For the Jeep and trailer I printed both in 175%, means larger than org. Jeep-card.

Files in directory should meet this size, otherwise test print and re-size.

Explore my other Printables: https://www.printables.com/de/@Tritschi 

Thanks to Playaction for this great model.

I adapted some parts, especially from standing to sitting situation. Helmet filled with bowl then cut off and head cut off. Sitting figure assembled and gaps filled. No movement possible. He is the driver and nothin else!