PuzzlePod

This is the perfect gift for your friends. It takes a lot of time to open, especially if you don't have experience with opening the box. It takes a lot of concentration for you to align all of the pins correctly.

The PuzzlePod can fit smaller gifts inside it, but it has enough space for something other than money.

The PuzzlePod is difficult to assemble, but the time it takes for you to put it together, your friend will take atleast the same amount of time to open it.

Here is a small assembly guide: https://docs.google.com/document/d/1cZOSKjwmlmfpWmJT0YwvOcoxp9TWLAwQX6ZCpaJfLLA/edit?usp=sharing 

Print Settings:
 

Box:

Slicer: Creality Print

Filament: Cr-Pla Silk Copper.

Layer height: 0.3 mm

Print Speed: 300mm/s

Supports: None

Bed adhesion: None

Infill: 20%

Top Part of Box:

Slicer: Creality Print

Filament: Cr-Pla Silk Copper.

Layer height: 0.2 mm

Print Speed: 300mm/s

Supports: None

Bed adhesion: None

Infill: 20%

Slide in Piece:

Slicer: Creality Print

Filament: Cr-Pla Silk Copper.

Layer height: 0.2 mm

Print Speed: 300mm/s

Supports: Normal

Bed adhesion: None

Infill: 20%

Door:

Slicer: Creality Print

Filament: Cr-Pla Silk Copper.

Layer height: 0.2 mm

Print Speed: 300mm/s

Supports: Tree Slim

Bed adhesion: None

Infill: 20%

Maze Piece:

Slicer: Creality Print

Filament: Cr-Pla Silk Copper.

Layer height: 0.2 mm

Print Speed: 450mm/s

Supports: None

Bed adhesion: None

Infill: 20%

Rod:

Slicer: Creality Print

Filament: Cr-Pla Silk Copper.

Layer height: 0.2 mm

Print Speed: 300mm/s

Supports: None

Bed adhesion: Brim

Infill: 20%

Pins

Slicer: Creality Print

Filament: Cr-Pla Silk Copper.

Layer height: 0.2 mm

Print Speed: 300mm/s

Supports: None

Bed adhesion: None

Infill: 20%