Voron Trident Raised XY Bridge Chain Bridge to suit 2-Hole Cable Chains
Remix of remixed Voron Trident or 2.4 XY Bridge Cable Chain Anchor, Raised 13mm for Backers by Ken226
18
88
1
673
updated
May 13, 2024
Description
PDFModified the Raised Voron Trident XY Cable Bridge to suit 2 hole cable chains such as the ones provided in the LDO Trident kits. Raised 13mm
Printed, fitted and tested on my Voron Trident. Fixes an issue with the XY Cable Bridge rubbing on the cable chain when the printer is fitted with titanium rail backers.
Print using the same material and settings as the default Voron parts. Uses the same screws. Requires 2 x M3 Heat Set Inserts (M3x5x4) to be installed as per original part and manual.
Original Voron-2 files released by Voron Design
Tags
Model origin
The author remixed this model.
Differences of the remix compared to the original
Changed original .stp file to suit 2 hole cable chains such as the ones provided in the LDO Trident kits.