FGC-68 UNW 14inch LB 2020

this is the shroud set based on the FGC-9 shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker.

to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker

if you see other models of FGC-9 shrouds these can me modded to fit on a FGC-68 the only difference is that the hole for the barrel is bigger. so this could be drilled, cut, or melted away with a soldier iron.

keep in mind that you will need a LONG key to install this shroud.
and since this is the one piece version. a big printer to print this shroud