Light Lotus Lamp - 200g

After printing two of the Light Lotus Lamps remixed by Mou, i wanted to have two more smaller ones from glow in the dark filament.

This remix scales the 175% Mou and Kim Andersen remix by 60% back to 105% of the Cheesus original.

I found some more potential to save material while keeping the construction solid.
This Lotus Lamp weighs in at about 200g.

For a complete Lotus Lamp you will need:

From the single STL files print:
40x small petal
20x large petal
10x arm
1x crown
1x lower ring

The prearranged 3mf build plates are printed as follows:
1x rings and two large and four small petals
2x five arms
3x six large petals
4x nine small petals
 

Weight reduction in this remix (15% infill, 2 perimeter)

• 100% original Lotus Lamp by Cheesus weighs 243,63g according to prusaslicer
• 105% Light Lotus Lamp Remix weighs in at 201g on a scale and prusaslicer
• 175% Large Lotus Lamp by Kim Andersen calculated with 1057g
• 175% Light Large Lotus Lamp by Mou weighs 550g on my scale

• Scaled to 60% of Mou and Kim Andersens remix while maintaining the E27 Socket cut-out and the 0.4mm z-height of the petals.
• Made the frame less obvious by shortening the petal holders
• Translate filenames to english