Hair Dryer Fan Mount for Radiators of 57,82,102mm depth

Bracket for mounting a hairdryer to a radiator in the bathroom. Different sizes.
0
10
0
80
updated October 16, 2024

Description

PDF

EN:
The apparent lack of demand in a bracket for the hairdryer 

https://www.printables.com/de/model/864578-hair-dryer-fan-radiator-mount 

for bathroom radiators gave me the idea that it could possibly be due to the large number of different radiator types with different dimensions. 
After measuring the radiators in my home, I designed a new bracket for a further 3 different models. As this was already designed modularly from the outset ( for reasons of print optimisation and not the variability of the radiator model(s)), it was somewhat easier as only one part, the ‘backbone’ of the suspension, had to be redesigned with new dimensions in each case.

I have therefore only posted the interchangeable ‘backbone models’ here, the ring for inserting the hairdryer can be found under the link above.

Installation tips can also be found under the link above.

UPDATE see: https://www.printables.com/model/1011734-hair-dryer-fan-radiator-mount-remix


 

Material: PLA / PETG
Layers: 0.2 or0.3 (0.3 sits tighter)
Supports: yes
Perimeters: 3
Infill: 10-15%

hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh


DE:
Das anscheinend geringe Interesse an einer Halterung für den Haartrockner  

https://www.printables.com/de/model/864578-hair-dryer-fan-radiator-mount

für Badezimmerheizkörper brachte mich auf die Idee, dass es möglicherweise an der Unzahl an verschiedenen Radiatorentypen mit unterschiedlichen Abmessungen liegen könnte. Nach durchmessen der Radiatoren bei mir zuhause, habe ich für weitere 3 verschiedene Modelle jeweils eine neue Aufhängung konstruiert. Da diese schon von Vorne herein modular konzipiert war (allerdings aus Gründen der Druckoptimierung und nicht der variabilität des/der Radiatorenmodelle) war es etwas leichter, da nur ein Teil, das "Rückgrat" der Aufhängung jeweils mit neuen Maßen neu gestaltet werden musste.

Habe deswegen hier auch nur die austauschbaren "Rückgrat-Modelle" gepostet, den Ring zum Einsetzen des Föhns finden Sie unter dem oben angeführtten Link.

Montagetipps ebenfalls unter dem obigen Link.
 

UPDATE unter: https://www.printables.com/model/1011734-hair-dryer-fan-radiator-mount-remix

Material: PLA / PETG
Schichten: 0.2 oder 0.3 (0.3 sitzt strenger)
Stützen: ja
Perimeter: 3
Infill: 10-15%

Tags



Model origin

The author marked this model as their own original creation.

License