esp32-cam OV2640 focus adjustment wrench

Printed all the available focus tools on printables for my sons ESP projects

Added labels so I could tell them apart

Danke - das Tool passt perfekt

Haven't tried it out yet, but printing worked so far

The holder works perfectly, but unfortunately the wrench was too big for my camera and I had to create a new one with smaller diameter. Then it worked like a charm.

Prints perfectly. Since I printed this stuff for a colleague, I cannot say if it works correctly

It's nice but in my case it didn't work 😕. The glue on the focus was very hard to remove.

Prusament PETG

Thank you for the model. Interestingly, while it worked like a charm for one of my camera modules, I just can't take the lens on the other module to move at all. Both were bought from the same seller at the same time and looks identical. So it seems like you sometimes might get bad luck and the lens will just be glued to much or something.

BTW, while the holder can be printed with 0.6mm nozzle, the wrenches have details small enough that I had to change the nozzle back to 0.4mm.

Works like a charm! The 8-sided wrench fit perfectly, the module holder was a bit wide (8.80mm) for my module (which measures 8.05x8.05mm).

Useful quick print, thanks!

Works, & is very useful.
Thankyou