BR12 Bluetooth Receiver Clip-on Mount

This is a mount to clip your BR12 bluetooth receiver on a piece of clothing or a belt.  

There are two variations, one uses a sider clip that can be used on a belt or strap.

The other users narrow clip which is good for fabric or a pocket.

The BR12 fits snug.  The jack, button and power port will continue to be clearly accessible.

The clips are not mine.

The shirt/pocket clip is https://www.printables.com/model/207064.  I used this clip in making Tinkerheart's stethoscope holder rotate.  It is a very robust design.  I reduced the nose so it wont jab into you as much.

The belt clip is a version of the Belt Holster Clip by LetuBotV4Rex.  I don't know what an IWB is, but the clip has a nice wide pocket that will fit on thicker items.  I found that it would fall off my pocket or shirt edge which is why I made the 2nd version.

Print Instructions:

I used organic / tree supports.  I would recommend printing with the clip on its side for maximum support.   You will only need to support a couple of places.