WFI Workbench Bottle Holder

I use WFI workbenches in my Makershop, as they have a nice modular system for heavy duty workbenches, which helps me organise my little space well. These workbenches are sold as “Tor” workbenches by Gerdmans in the Nordics and various other retailers here and elsewhere.

I wanted to claw back some space on the bench, so I made this little holder to hold my iso bottles within reach on the bench leg, which already has mounting holes for something else.

There is an un-configured 3MF provided as well as a Bambu Studio version pre-configured for PA6-GF. If you go for PA6-GF please pre-heat the chamber above 40c.

Assembly

There are 10mm holes in the side to match the 10mm holes in the legs. You will need nuts and bolts for these. Also there is a hole in the back for a 5mm plastic insert, which you can optionally use in combination with an M5 screw and probably a large mudguard type washer to secure the backside also. I am using all three.