ICON Semi-Deep Socket Rail

Here is what I've come to decide as my favorite way to do socket organizers. a very low-profile rail with pegs to hold the socket and side walls for rigidity as well as means for grabbing out of your box to set on your cart or work area. I am undecided on the number labeling but for my needs this suits me, and they came out nice. 

It was designed for the Icon Semi Deep Metric socket set

3/8 in. Drive, Metric Professional Semi-Deep Socket, 12-Piece (harborfreight.com)

YMMV on your machine, however for my CR10 printing text vertically like this could almost be considered a stress to the accuracy of your printer. i have been getting the best results with my machine by slowing the wall speed down to about 20 and also playing with Curas ‘Make overhangs printable’ feature. you want to give just enough of an angle to not wash the numbers out but just add an extra line for support underneath. i found 70* is about perfect for not even noticing the extra mark. this allows me to extrude the numbers a little farther (.032"/.8mm) to enhance the sharpness.

i get many Downloads but very little posts on their makes, so if you do make this be sure to post it in your environment. it may help me find new ways to make it better. also, if you have other needs/ configurations, feel free to ask. I can make the change for you.