FGC-6 G&G Combat Machine shroud set airsoft

this M4 airsoft based AEG kit is made for the G&G Combat Machine. but it might work for other platforms as well. I would recommend looking first at the movie to see if the mounting points look a bit the same before starting out printing parts…

this rail kit will make it possible to use the FGC-6G&G shrouds on your G&G Combat Machine.
there is also a mounting point in the shroud for a outer barrel to be mounted on. this is currently only made for 1 shroud and barrel length. but this should be a part that can be easy made your self to a different size

you will need to use 2x M3 bolt 12mm long to mount the shroud block (“pin”)
and 3x M5 bolt 30mm long
and 2x M3 bolts of 10 or 12mm long for mounting the outer barrel

the other parts can be found here
https://www.thingiverse.com/untangle/collections/fgc6-gg-combat-machine

movie link:
https://odysee.com/@UntangleWORKS:a/UNW-FGC6GG:2