FGC-6 MKI / MKII S AF H LB and LB SHORT outer barrel and suppressor set

as part of the big V24 update. the 14mmccw barrels have been made a bit stronger

-

• 14mm CWW barrel tips have been added ---

this is a 300mm long barrel replica made for the LB (the original, 2021,2021 M) shroud. and works for the MKI and MKII. I have also added a suppressor version for the LB Short shroud for a regular barrel look at the FGC6 S AF MKII outer barrel and suppressor set.

and the way in install the two piece outer barrel is to install the 2 lower bolts first in your shroud. then slide the outer barrel in your shroud. and install the 2 m3 bolts at the top 2 holes of the shroud

-

-

these are the 2023 versions of the Outer barels for the FGC6 MKI/MKII (s, FA, H) platform. this barrel will have a tighter Inner diameter size at the tip of the barrel. this will act like a inner barrel stabiliser so in other words it prevent it form moving around.

but before you select and print a outer barrel. make sure that your FGC6 is working correctly. and take a close look at the barrel adapter that you use.

the file naming works as fallows: 
227 slim barrel 00mm 9 18mmID
(227 slim = shroud model) (barrel = what type of barrel) (00mm = inner barrel hight) (9 18mmID = inner barrel OD size)

-

this outer barrel is made to work with the fallowing models:

for the  FGC6 -MKI
FGC9 UNW LB SHROUD set
https://www.printables.com/model/87865-fgc-9-unw-long-barrel-shroud-set

FGC9 UNW 2021 LB SHROUD set
https://www.printables.com/model/87820-fgc-9-unw-2021-long-barrel-shroud-set

FGC9 UNW Modular SHROUD set
https://www.printables.com/model/87814-fgc-9-unw-2021-long-barrel-modular-shroud-set

FGC-9 UNW Long barrel Short shroud set
https://www.printables.com/model/87864-fgc-9-unw-long-barrel-short-shroud-set

FGC-9 UNW 2021 Long barrel Short shroud set
https://www.printables.com/model/87817-fgc-9-unw-2021-long-barrel-short-shroud-set

FGC-9 UNW AK shroud set
https://www.printables.com/model/87805-fgc-9-unw-ak-shroud-set
-
for the FGC-6 MKII

FGC9-MKIISD XM8 XL SHROUD set
https://www.printables.com/model/88658-fgc9-mkiisd-xm8-xl-shroud-set

FGC9-MKIISD LB SHROUD set
https://www.printables.com/model/87695-fgc9-mkiisd-lb-shroud-set

FGC9-MKIISD LB 21 SHROUD set
https://www.printables.com/model/87685-fgc9-mkiisd-lb-21-shroud-set

FGC9-MKIISD LB 21 Modular SHROUD set
https://www.printables.com/model/87684-fgc9-mkiisd-lb-21-modular-shroud-set

FGC9-MKIISD LB 21 short SHROUD set
https://www.printables.com/model/87681-fgc9-mkiisd-lb-21-short-shroud-set

FGC9-MKIISD AK SHROUD set
https://www.printables.com/model/87678-fgc9-mkiisd-ak-shroud-set

FGC9-MKII LB short SHROUD set
https://www.printables.com/model/88166-fgc9-mkii-lb-short-shroud-set

-
the video about it can be found here.
https://odysee.com/@UntangleWORKS:a/FGC6FA-outerbarrel:f
https://youtu.be/0dA8RhMdQiI

-

materials needed:
shroud
4x M3 washer
4x bolt m3 35mm or 40mm long

2 piece barrel
2x m3 18mm long

suppressor 
2x bolt m2,5 18mm or 20mm long

-

print settings:
0.2 layer hight should be fine.
you can use the 8 layer walls and a 40% infill.
but personally I moved a bit over to solid prints just to give it more strength in case things go wrong on the field…