T-Handle for 5mm Hex nut or bolt

Simple T-Handle I designed for a Festool Domino plate adapter.  It's based around a 5mm hex head bolt or hex nut.  The hex nut or bolt is meant to be friction fit.  I used with a nut.  Easiest way to get a nut in is to place a long 5 mm bolt in from the bottom and thread it on, then pull it through until it seats.  You can then tighten the nut to lock it into the housing.

My Print Settings on Bambu P1P

• ABS
• 0.28mm Layer Height
• 3 walls
• 40% infill
• Print with small end down with no supports (designed with 45º overhangs)

Probably overkill but should last.

Fusion Model included in files