Beagle V2 camera mount for Prusa MK3

I use the Beagle V2 to remote monitor printing. I like this camera because it is specifically designed for 3d printing.

The mount has the following features:

• Mounted on the Z axis stepper, provides perfect view thought the whole printing.
• Fixed position, no accessory required to tune the view. 
• Fits perfectly the camera.
• Cable Management, for USB3 cable 4-5mm section (the one provided with the camera)
• Flush 3d printed screw.

How to print:

• The mount can be printed with default settings: 0.2 layer size, 15% infill, etc. It does require support for the arm, see recommended printing screen capture.
• The screw is very small, it requires 0.1 mm layer size, 3 perimeters, 80% infill. It uses a 3mm allen key. It is difficult to insert the key in the socket the first time, due to elephant foot, etc. Be gentle as plastic does not make the best screws.

Cable Management

I recommend  using zip cable ties provided with the prusa to attach the cable to the z axis cabling. Also use the provided 2 cable management points in the arm.